SAW-Spiral Welded Pipes for Piling Works & Pipelines

Odelya® Spiral Submerged Arc Welded (SSAW) Carbon Steel Pipes are manufactured from hot rolled coils straightened in a strip, which are then formed in required angle to produce a cylindrical spiral shape of desired diameter. In submerged arc welding process an electric arc is produced in gas environment by applying electric current. The edges of a strip are carefully welded internally and externally by submerged arc welding process using single, tandem or triple techniques with continuously supervision to prevent possible defects. Quality and maximum performance of entire weld are assured by computerized inspection process, applied during and after HSAW welding.

PRODUCTION RANGE

Outside DiameterØ17,1 mm – Ø610 mm (0,675 inch – 24 inch)
Wall Thickness1,4 mm – 12,7 mm (0,055 – 0,500 inch)
LengthStandard length is 6 meters. (From 2 meters to 13 meters, on request) Tolerances may vary according to standards. Please contact us to get full clarification.

MATERIAL QUALITY

API 5L / ISO 3183 PSL 1Gr A, Gr B, X 42, X 46, X 52, X 56, X 60, X 65, X 70
API 5L / ISO 3183 PSL 2Gr B, X42, X46, X52, X56, X60, X65, X70, X80
EN 10208–1,2 L 245NB, L 290NB, L 360NB, L210GA, L235GA, L245GA,L290GA, L360GA
EN 10025S235 - S355
DIN 17100St 37- St 52
ASTM A252Grade 1, 2, 3
EN 10210S235, S275, S355, S420, S460
EN 10217-1P 195 TR1, P 235 TR1, P 265 TR1, P 195 TR2, P 235 TR2, P 265 TR2
EN 10217-3P275NL1,2, P 355 N, P355NH, P355NL1,2, P460N, P460NH, P460NL1,2
EN 10217-5P235 GH, P265GH, 16Mo3
EN 10219S 235, S 275, S 355
EN 10224L 235, L 275, L 355

PRODUCT STANDARDS

Petroleum and Gas Line Pipes (Oil and natural gas pipelines)
API 5L (ISO 3183) PSL 1 & PSL 2
EN 10208-1, EN 10208-2, GOST 20295 Type 1, 2, 3, DIN 2470, DIN 17172

Water Line Pipes
AWWA C 200, EN 10217-1, EN 10224 (BS 534, DIN 2460, UNI 6363, NFA 49-150), DIN 1626

General Purpose Pipes
EN 10217-3, EN 10217-5, EN 10217-6, ASTM A139,
EN 10224 (NFA 49-150, BS 534), EN 10219, BS 3601, DIN 1626

Piling & Construction Pipes
EN 10219, EN 10210, ASTM A 252, JIS A-5525, DIN 17120, DIN 1615